AUTO BUSSING
Function Introduction
The cell induction soldering head is used to inter connect and solder the bus ribbon at the head, middle and tail of the outgoing line type assembly; it has the function of coil bus ribbon feeding belt and bending U-and L-type lead sup ward. Higher speed; compatible with larger size modules.
Characteristics
- Cycle time 17s, high speed.
- Strong compatibility: compatible with Multi-shard of 6 strings, 5 strings single Bypass soldering and 6 strings double Bypass soldering
- Corrects twice to the position of the 10/12 series hallf piece cell string, grabs the cell string by vacuum adsorption, one time empty solder- ing and high welding accuracy.
- Can punch at the end of the bus ribbon
- Single side feeding, easy to operate
- Convenient specification conversion.
- Double Bypass soldering integration can meet the customer's demand for 6 strings double Bypass soldering of bypass bus ribbon, can be closed or opened according to the actual use demand.
- The smallest floor area, the lowest CoO.
Specifications
- Cycle time: 17sec/panel(single bypass soldering)
- 21 sec/panel (opening Double bypass soldering)
- Activation: âĨ 98%;
-
Panel specification:
A.156-180 Cel: 6 strings x 10 half pieces x2; 6strings x 11 half pieces x2;
6 strings x 12 half pieces x 2; 6stings x 13 half pieces x 2
B.182 Cell: 6 strings x 9 pieces x 2:
C.210Cel 6 strings x 10 half pieces x 2:6strings x 15 one third pieces x 2:
D210Cel 5 strings x 10 half pieces x 2:5 strings x 15 one third pieces x 2 - Cell space: -0.5-4mm;
- String space: 1-6mm;bypass soldering of String space:>10mm:
- Glass specification: width (980-1500mm)x length(1720-2600mm);
- Correction accuracy of cell string: sÂą 0.25mm;
- Equipment power supply: three-phase 380V 50/60Hz:
- Power: peak 35kW;average 25kW;
- Air: positive pressure 0.6-0.8MPa, negative pressure about- 70kPa;
- Equipment size: length x width x height:6580x5604x2621mm (including two assembly lines)
