AUTO TRIMMING
Function Introduction
Cut the excess backplane and EVA around the laminated assembly
Parameter
- Applicable components: conventional, half sheet and double glass components of length 1640-2600mm & width 950-1500mm
- Working beat: 22 seconds
- Maximum production capacity: 3,400 pcs/day
- Online operator: No
- Weight: approximately 2150kg
- Rated power (KW): 2KW
- Pressure (MPa): 0.6-0.8MPa
- Interface specification: 12
- Noise (dBA): <72db
- Overall dimension (length, X, width, X, height): 3,520 mmx2240mmx1200mm
Advantage Introduction
- The equipment is driven by a servo motor, which has the advantages of accurate precision and smooth operation;
- The whole machine is equipped with a safety fence, which has the safety protection function;
- Automatic control of the equipment, and the operation process does not require personnel intervention;
- When working, the four sides of the component are cut at the same time, which has the advantages of high efficiency and stability,
- Set up the guide device to prevent the waste material from splashing;
- The blade adopts circular arc edge, cut clean, and uses the blade back edge to effectively remove the residual material of the component;
- Easy to replace the blade;
