MBB SOLAR CELL TABBER N STRINGER - WCS-2000M
Technical Specification
- Production capacity: Estimated 2.0-2.3s/pcs for conventional flat ribbon soldering cycle;
- Comprehensive damage rate: ≤2‰ Class A solar cells
- Soldering method: infrared light
-
Applicable Specifications: The whole piece of 156*156mm, 156.75*156.75mm, 158.75*158.75mm,
166*166mm, 5BB, 6BB, 9BB, 10BB, 11BB, 12BB, 13BB cells
Polycrystalline cells or Monocrystalline cells For 156-166mm cells, available for cut cells ≧30mm, for 182-210mm cells, available for 1/2, 1/3 cell
standard poly cell size 157 mm. X 157 mm. for full and for cut size that is 104 mm X 157 mm. and 53mm. X 157 mm. - Soldering Temperature: ≤±10℃
- Ribbon positioning accuracy: ±0.5mm
- Ribbon width: 0.6～1.6(mm) different solar cell use different ribbon
- Ribbon thickness: 0.12～0.2(mm) different solar cell use different ribbon
- Cell positioning: Mechanical positioning
- Cell detection: Cells need to be tested and confirmed before loading
- Cell thickness: 160μm-300μm
- Soldering ribbon supply: Guide positioning, automatic straightening, bending, cutting
- Maximum string length: ≤ 2100mm
- Feeding method: Continuous feeding without stopping the machine
- Cell transmission method: Imported Teflon belt transmission
- Electrical system: PLC+servo control system
- Human-machine interface: touch screen, easy interface operation
- Fault alarm:Real-time fault alarm
- Use environment temperature: 5℃-35℃
- Power supply: Three-phase five-wire 380V±5% 50Hz
- Compressed air Air pressure: 0.5MPa—0.8MPa Air consumption: 0.5m³/min
- Power consumption: peak 18KW, average 10KW
- Equipment size: length * width * height 5890x1590x1850(mm)
- Equipment weight: 3000kg
